The Tyre Factory trusts and sells Roadsafe 4WD products. Our goal is to offer high quality, affordable components specific to your 4WD.Roadsafe have been supplying passenger vehicle chassis components in Australia for over 30 years, and have a very strong reputation in the Australian Automotive Aftermarket. Roadsafe offer Australia’s largest front end range, with new product constantly in development. As a testament to quality and supply ability, Roadsafe are recognised as a leading distributor in the industry.Several years ago Roadsafe launched a new program focusing on market leadership in the 4WD sector.
Recognising a need for high quality components and consistency in supply, Roadsafe has quickly developed a large range of essential Steering & Suspension components for the 4WD industry. Be assured when you purchase Roadsafe 4WD branded suspension products, you will have a top quality item, fully warranted, and developed to suit Australian conditions.
Featuring CV Shafts to suit over 180 4WD applications, the new Roadsafe 4WD CV Shaft range covers the majority of common application demands. The high quality CV Shaft assemblies are supplied complete to include all necessary hardware and are guaranteed to fit correctly as per OEM Specifications. The range also includes Heavy Duty (externally greasable shafts) compatible with 76/78/79 Series, plus a key range of shafts modified from the OE design to ensure cage alignment promoting good strength and wear characteristics on lifted applications.
BLACKHAWK Upper Control Arm’s
Roadsafe 4WD have developed the Blackhawk 4x4 range of UCA’s. This range of product takes the best of the OE product and puts it into a newly designed arm packed full of features & benefits specially tailored to vehicles that have raised suspension between 30-70mm. Blackhawk UCA’s are a fixed Balljoint and Rubber bushed UCA providing all the correction you need for 30-70mm suspension lifts. Well presented in retail packaging, each part number suits 1 pair per vehicle, with no extras required, and ready to fit. While maintaining the OE spec rubber bushings to give the best NVH control possible, coupled with a specially designed serviceable greasable ball joint that has tested to exceed the results of an OE sample with 500,000 cycles measured!!
- CV joints machined accurately and precisely with hardening where required.
- High torsion steel axle shaft with protective coating to prevent corrosion.
- All rolling components, race and ball tracks precisely machined to ensure smooth and quiet operation and long life.
- All splines hardened and machined to OEM specification.
- High quality neoprene CV boots fitted with quality stainless steel clamps.
- Top quality long lasting moly grease used in CV joints
We Lift your performance with a “Perfect Lift” ! Talk to a 4x4 Suspension expert at The Tyre Factory, we are an authorised Stockist and Fitter of Perfect Lift suspension and Lift Kits.
The Perfect Lift - Lift Kit range has been designed to meet the needs and applications of all 4x4 enthusiasts, drivers and Tradies that carry a medium to heavy payload or just want the perfect Lift to allow BIG Tyres and Wheels (at the Tyre Factory we do the lot). Intended as the ultimate set up on-road and off-road let the Tyre Factory do what our competitors don’t. As the experts in Tyres and Wheel technology we will build you the ultimate suspension set up for your 4x4... Perfect Lift suspension comes with a Limited Lifetime Warranty.
By understanding our customer’s driving habits and the latest in Tyre Technology, we’re recommending this range of kits for the weekend warrior and the weekday workhorse. This product has been tested on a wide range of vehicles and is engineered in Australia for Australian conditions to have the flexibility of on-road softness for comfortability and off-road ruggedness for performance. The Perfect Lift range of extra heavy-duty shocks, springs & strut applications are for vehicles used for long distance touring, 4x4 driving and heavy-duty applications.
A Perfect Lift - Lift Kit is a complete vehicle suspension lift kit containing all necessary components, ready for installation. Designed for vehicles with extra accessories fitted to the front of the vehicle. The Tyre Factory Technicians are experts at fitting and setting up your 4x4’s and all Lift Kit installations include a wheel alignment and Free fitment check and adjustment after 4 weeks.
Perfect Lift Pro Shocks feature:
- Height Adjustable Spring Seat Struts - for fine tuning ride height
- A large capacity body - for extra oil and added strength
- 20mm Chrome Piston Rod - for extra strength when side load exists during full travel
- 40mm Diameter Piston - allowing for more precise tuning
- Dual Dust Seal and Oil Seal
- Heavy Duty Rubber Bushes - for a long-life cycle
- Australian made coil springs
- Greaseable shackles and pins
- Polyurethane bushes
Approx Lift Front 30mm-50mm
Approx Lift Rear 35mm-50mm
A Perfect Lift - Lift Kit is a complete vehicle suspension lift kit ready for installation. It’s designed for vehicles with extra accessories fitted to the front of the vehicle (Like a Bull bar etc).
Increased oil capacity vastly improves the shock absorbers ability to dissipate heat and operate cooler over long distances and constant high speeds. Viton seal & high-temperature oil to withstand higher operating temperatures longer, outlasting standard oils, and rubber seals. Perfect Lift Pro shock absorbers have been designed to withstand even the harshest of Australian conditions.
Perfect Lift - Lift Kits attain greater performance and endurance through:
- 57mm external body sizes
- Nitrogen gas cells inserted between the inner and outer tube.
- World Class High-temperature Hydraulic oil
- High-temperature resistant seals to elevated temperatures
Perfect Lift 4X4 Suspension Lift Kit (50mm-60mm) Contents:
2 x Big Bore Gas Struts: (40mm Bore & 57mm Body) (Silver)
2 x Big Bore Gas Shocks: (40mm Bore & 57mm Body) (Silver)
2 x Coil Springs are tapered Wire Technology Coils (Comfortable ride with increased spring rate)
2 x Rear Leaf Springs 0-250 kg load. (300kg & 500kg options available if required)
1 x Perfect Lift Pro Polyurethane Bush Kit (Two Years Warranty)
2 x Greasable Shackle & Pin Kit (All pivot points are greaseable)
4 x Heavy Duty U-Bolts
PERFECT LIFT KIT WARRANTY TERMS
Perfect Lift will warrant all shock absorbers against defects in materials or faulty manufacturing provided the shock absorbers are installed as recommended by the Tyre Factory with the correct spring listing. The following warranty period applies from the date of fitment, whichever occurs first. Two (2) years/60,000 km
All Perfect Lift coil springs have two year warranty on faulty manufacture, breakage and sagging (being a loss of unladen height of more than 10mm).
SHACKLES AND PIN KITS
A 12-month warranty covers spring shackles, pins and U-Bolts against defects in materials, or faulty installation. Provided the products have been correctly installed. Perfect Lift recommends that U-Bolts are retightened after initial 500 km’s (4 weeks) by The Tyre Factory at no charge, and also checked at regular intervals.
All polyurethane suspension bushes are warranted to the original purchaser for two years from the date of purchase against defects in materials or faulty workmanship provided the bushes have been correctly installed. Perfect Lift recommends shackles and pins should be replaced when there is any evidence of severe rust or wear to optimise the life expectancy of the bushes.
Leaf springs listed are warranted for 12 months against faulty manufacture, breakage and sagging (being the loss of unladen camber by more than 12 mm).
Nitro Gear Australia - Parts you can depend on
Aftermarket differential and axle parts, for a wide range of applications. Nitro are at the forefront of the industry by developing new applications.
Nitro know differentials, and know what it takes to manufacture high quality components.
Nitro Gear are among the best in the industry - by using better materials, better machining and better lapping and heat treating processes, Nitro Gear can ensure a strong, quiet-running, long-lasting setup. Each new product is subjected to multi-point inspections and then actually installed and set up by Nitro's own in-house differential experts to ensure excellent fitment and easy setup. At Nitro we strive to meet our consumers demands for new ratios and applications and we are continually developing new products to stay ahead of the competition.
Products Include: Ring & Pinions, Full Float Rear Axles, C-Clip Rear Axles, Semi Float Rear Axles, Front Axles, Birfields, Full Spools, Mini Spools, Pinion Yokes, Positractions.
The Tyre factory are an authorised fitter and stockist for TOUGH DOG SUSPENSION
Tough Dog has been “making tracks across the world” since 1985, and have grown rapidly as a result of the excellent reputation their quality gear commands. Today, Tough Dog products are sought all over the world, and the distribution network spans 42 countries. With some of the harshest conditions right here in Australia to test out products, the gear that makes it to the market is a cut above the rest.
Tough Dog’s pioneering attitude to R&D has resulted in them leading the way with several unique products. The Return To Centre and the ‘SV’ adjustable steering damper are two great examples of the results of the team’s unique thinking when it comes to making the best offroad suspension system available.
The hard yards, and hours perfecting their range of shocks and springs were officially recognised when the Tough Dog 41mm Foam Cell Shock was awarded first place in independent shock absorber testing by Australian 4WD Action Magazine. The Tough Dog Tuff Truck Challenge represents the pinnacle of Aussie 4WD competition.
Ask a Tyre Factory 4x4 Specialist today about a great Deal on Tough Dog.
The Tyre Factory Dandenong and Sunshine stores in Victoria and Lansvale (Sydney) are authorised fitters and stockists of the Fulcrum Suspension Range
FULCRUM - Built to tackle your next adventure!
Australian Made 4x4 Lift Kits – ask us HOW to fit the best to your 4x4
Get the best 4x4 lift kit for your next off road adventure from Fulcrum Suspensions! We have put together the best range of lift kits that will give your 4WD the power and control it needs to handle absolutely everything that comes its way. Whether you’re tackling the tough Australian Outback, touring the vast distance of our open roads or cruising along the beach, with a Fulcrum lift kit installed, you know your 4WD can handle it. Designed and tested by and for Australian 4x4 enthusiasts and adventurers, every Fulcrum 4WD lift kit is built to last.
Fulcrum Suspensions, make it a priority to ensure your vehicle receives the best possible upgrade, suited to your 4WD’s requirements and your driving preferences. The Tyre Factory sell and fit the full range of 4x4 lift kits include Bilstein 4x4 lift kits, Formula 4x4 lift kits, RAW 4x4 lit kits.
We understand that you may like to load up your 4WD with tools for work or 4x4 gear. The Fulcrum Research and Development team have specially built 4x4 suspension lift kits to handle constant increased load. Fulcrum also offer load enhancement 4x4 lift kits, and performance 4x4 lift kits to provide you with better off road and on road handling. Each of our lift kits are designed to give your 4WD improved stability with load or when towing, increased comfort on and off road, and of course give you greater control when driving your 4WD. 4x4 lift kits from Fulcrum Suspensions are designed to lift your 4x4 vehicle to the legal maximum height, allowing for bigger and tougher tyres with greater clearance. Ask a Tyre Factory expert about the Biggest and Best wheels and Tyres to complete your 4x4 transformation.
Fulcrum guarantee the quality and craftmanship of all lift kits by backing them with a 3year/60,000km warranty giving you peace of mind while enjoying your new lift kit.
Formula 4x4 kit
Raw 4x4 kit
OUTBACK ARMOUR - Australian designed & engineered four wheel drive suspension systems.
The Tyre Factory now offers the full range of Outback Armour suspension which has increasingly become the popular standard in 4WD suspension. With more than 35 years of experience in ensuring the mobility of 4WDs across the most trying terrain, Outback Armour is now a highly sought-after after brand for some of the most important hardware in 4WD modification.
Outback Armour have developed a full a range of struts, shock absorbers, steering dampers, coil springs, leaf springs, u-bolts, shackles, pins, and associated fitments for an extensive range of 4WD models. Outback Armour suspension products are designed and engineered in-house in Australia to have the strength, durability, performance and reliability required for the most demanding applications. Never go alone again with the confidence Outback Armour by your side.
Outback Equipment stocks a range of vehicle specific suspension kits with front lifts and rear lifts with different specs options to cater to various loads. Ask a Tyre Factory Expert Today on How to make your 4x4 Outback Armour TOUGH.
WE WON”T LET YOU DOWN OR SAG
We also can source and Fit